Knives, scissors, peelers and the one tool you actually need
by Marco Bianchi
A guide to keeping kitchen edges sharp: what a steel, a stone and a pull-through actually do, how to sharpen a knife properly, and how to bring back scissors, peelers and garden snips.
How this one was built
Built from the guide template. The one-tool-per-chapter rule was a key fact, and the angle numbers are repeated in every chapter.
Sample only — the manuscript is not for sale. The plan is free to copy.
Read the first chapter
The opening, in full. About 1 min. Turn the pages with the arrows, your keyboard, or a swipe.
Chapter 1
Take a knife that will not cut a tomato and look closely at the edge. If the edge is intact but feels rough or turned over to one side, the knife is not dull. It is misaligned, and the tool for that is a steel.
If the edge is worn, rounded, or you can see a flat strip of metal where the edge should be, the knife is dull. A steel will not fix that. It will make it look better for one session and then let you down, and the disappointment is how people conclude they are bad at sharpening.
Every chapter in the book, with the one-line recap it is written against. The first is free above; the rest arrive as empty pages when you copy the plan, and cost 3 credits each to write.
Chapter 1 — What a steel does (and does not do)
The steel in the block does not sharpen. It realigns. Knowing which one you need saves an hour.
Who it is for
For home cooks whose knives have not been sharpened since they were bought.
What you end up with
A sharp knife, a sharpening routine, and a method for every edge in the kitchen.
You get the same 1 chapters, in the same order, with the same recaps — and an empty page under each one. Change the title and the angle, then write it in your own words.
Pick the type, write the premise, and the plan gets generated for your topic instead. Export it as EPUB when it is done.